Scientific and technological innovation, integrity and pragmatic, win-win development

Fine particle re-election equipment is widely used in the field of mining, but in daily use, there are often some common problems, such as equipment leakage coarse, fine, screen blockage and so on. If these problems can not be dealt with in a timely and effective manner, it will affect the production efficiency and quality of the equipment.
In view of the common coarse leakage problem of fine particle re-selection equipment, first check whether the feed system of the equipment is operating normally, and then check whether the screen and vibrator are abnormal. The problem of leakage can be solved by adjusting the vibration force and vibration frequency, and replacing the appropriate mesh size.
The problem of leakage is often caused by the wear of the screen or the use of the screen for too long. At this time, the screen with serious wear needs to be replaced in time. In addition, you can also clean the screen in time to keep the screen open to avoid the occurrence of leakage.
Screen clogging is one of the common problems in fine particle re-selection equipment, which may be caused by high humidity or high viscosity of the material. The solution can be to install a cleaning system, increase the size of the discharge port, select the appropriate screen material to avoid the occurrence of screen blockage.
In summary, the problems that often occur during the use of fine particle re-selection equipment need to be solved by timely and effective measures. Manufacturers and users can take corresponding treatment methods for different problems to ensure the normal operation and efficient production of equipment.